General safety rules for injection molding machines

security
1.1 General safety rules
The maintenance, repair, and upkeep of the machine must be carried out by experts with sufficient qualifications and extensive experience in the field of injection molding machines. They should be familiar with industrial lifespan and safety standards, and should be familiar with the construction and function of necessary machine safety equipment.
Attention:
The safety device installed on the machine is designed to ensure the safety of the operator and ensure that the product is not damaged.
The machine must ensure that all safety equipment is in normal working condition before operation.
Do not arbitrarily remove any safety devices.
Security facilities also include programs in the software and do not allow any modifications to the program.
If any accidents or errors occur in the safety facilities, the machine must be immediately shut down;
The emergency stop button, the main power switch, will turn off the cooling water supply after about 20 minutes, and the person in charge must be notified immediately
Before restarting the machine, the fault must be eliminated
1.1.1 Machine safety signs
Please pay attention to all safety signs during production, using both Chinese and English, and be sure to adhere to the principle of "safety first".
1.1.2 Precautions during maintenance and repair
Attention!
All maintenance work must be carried out when the main power switch of the injection molding machine is set to "0". If necessary, lock it with a padlock.
Employers have the responsibility to inform operators about the construction and functions of safety facilities, and to take personal health and safety seriously.
Attention!
Any work that may damage the safety facilities of the machine should be stopped.
Employers must ensure that the operators are experienced and qualified operators.
Under no circumstances should safety facilities be detached from the machine or rendered ineffective. If it is indeed necessary to remove the safety device in order to repair the machine, safety must be ensured. After the maintenance work is completed, reinstall the safety facilities as they are and check the effectiveness.