Content Of Vertical Injection Molding Machines

1. The injection device and mold locking device are located on the same vertical centerline, and the mold is opened and closed in an upward and downward direction. Its floor area is only about half that of a horizontal machine, so when converted to floor area, its productivity is about twice that.
2. Easy to achieve insert molding. Because the surface of the mold is facing upwards, it is easy to position the insert. By using a machine with a fixed lower template and a movable upper template, the belt conveyor device can be combined with a robotic arm to easily achieve fully automatic insertion molding.
3. The weight of the mold is supported by a horizontal template for up and down opening and closing actions, and there will be no forward tilting caused by the gravity of the mold, similar to a horizontal machine, which makes the template unable to open and close. It is beneficial for maintaining the accuracy of machinery and molds for durability.
4. By using a simple robotic arm, various plastic cavities can be removed, which is conducive to precision forming.
5. The general locking device is surrounded by an open structure, which is easy to configure with various automation devices and is suitable for automatic forming of complex and exquisite products.
6. The belt conveyor device is easy to install through the middle of the mold, making it easy to achieve automatic production during molding.
7. Easy to ensure the consistency of resin flow and mold temperature distribution within the mold.
8. Equipped with rotating countertops, moving countertops, and tilting countertops, it is easy to achieve embedded molding and in mold combination molding.
9. During small-scale trial production, the mold structure is simple, low in cost, and easy to unload.
10. Having withstood multiple earthquakes, vertical machines have better seismic resistance compared to horizontal machines due to their low center of gravity.